Please note that due to high demand, this product is now included with the Street Bike Tire Changer for your improved tire change experience.
15mm Spindle Kit for smaller hub sizes than the original spindle on Rabaconda Street Bike Tire Changer. Works on hubs between 15-20mm.
The kit includes:
15mm spindle
a two-stepped bushing with 17mm and 19mm steps
adapter for the duck head ratchet system
When using the kit:
screw the 15mm spindle fully to the center spindle socket on the main leg
place the wheel on the center spindle
if needed, add the 18mm hub adapter to reduce free play
insert ratchet system adapter to ratchet system center hole
place the ratchet system on the center spindle
For information: The original spindle is 20mm and together with the stepped bushing, it can be used on hubs between 20-32mm.
IMPORTANT! We recommend measuring your bike's hub sizes before buying an adapter or spindle.
Customer Reviews
Overall rating: 4.6 / 5 from 50 reviews.
Changed both tires on my 1984 BMW R100RS, and discovered the axle is smaller in diameter than current models. Rabaconda quickly dispatched their “skinny” spindle and I was ready to get started. Also reminded myself how much I hate changing narrow tires with tubes……
I have used my set up many times to change tires on various brands of motorcycles. I recently purchased a Royal Enfield Interceptor 650 and found the axle size to be too small for the supplied spindle. I still successfully changed the tires using the bikes axle as a makeshift spindle. The new 15mm spindle will be a plus in the future. I am 70 years old and have always changed tires with spoons, a homemade 2X4 frame and an old fashioned bumper jack as a bead breaker. With today’s large, low profile and hard tires my old method had become very difficult to near impossible for me. The Rabaconda has allowed me to continue tire changes into my older years.
Bought the rabaconda and it works as good as the hype but I had a chopper come through the shop with smaller bearings and needed the small shaft ...it worked perfectly and the tires I took off where from 2002 and it had zero trouble ...Great machine highly recommend!!
I ordered it one day and received it the next day. I am not about 3 hours away but that was quick. I haven’t used it yet but it appears to have the same do of quality that the existing spindle has.
I received the spindle very quickly. When I used my buddy's Rabaconda to change the tires on my CFMoto to the Tusk 2 Track, the spindle was exactly what I needed, and the Rabaconda did a great job, even with tires as stiff as the Tusk 2 Track....
Just a great piece of shop equipment!
Being able to handle tire changes without the drama of depending on outside services is completely awesome!! Keep up the great work guys. I recommend Rabaconda to anyone who has bikes and loves to wrench 😎
A necessary accessory for BMW RT rear wheels. The spindle worked but the plastic alignment bushing constantly works it way out while turning the wheel and has to be reset.
Got the job done and fit the wheels but bent under regular use. Still functional but not looking forward having to replace it for $57 USD in the next couple years.
Store owner replied:
Hello James,
I am sorry to hear the spindle has bent. Good news is our Rabaconda products include a lifetime warranty so I am happy to replace this part. We strive for continuous improvement so would like to understand exactly how this part bent. Will you please provide more detail as to how this part bent, pictures are appreciated. I will also need your shipping address for where you would like the warranty replacement part shipped? Please email me at support@rabaconda.com.
Thank you
First shipment had missing parts and it was corrected right away thank you
I really like the Tire changer, it’s easy to use and makes the job faster . I wish the 15mm spindle was made out of a harder metal. I’m on my 3rd one because they bend over time no matter how much I follow the directions. I change super sport street bike tires and even tried changing a Harley Davidson tire with no luck. The duct head wouldn’t fit on the deep dish rim and I think the white wall tire was too thick. I purchased the spoke rom duck head but still couldn’t get it. I personally like this product but I think it could be better.
15mm spindle was long and hard and fit perfectly in the honda Rebel's bearing hole and did great removing the tire. The original 21mm shadt had too much girth and wouldn't fit in the hole. This one fit 5/5 would recommend
Works as intended because I got for front wheel on Yamaha mt09,even tho it was a small piece of the larger tool the overall experience was great 👍Rabaconda
I love this tire changer, my only complaint is that all spindles should be included in initial tire changer kit. Also, I do change solid rims occasionally, I simply made a bolt and bushing to insert from backside of locking holes to go into brake disc on rim . This changer saves me hours!! Thank you
I went to change tires on my 2017 Ninja 300 track bike and realized the standard Rabacanoda shaft was too big for the Ninja's hubs, so I ordered this one and it worked perfectly. Well worth the dollars!
the 15mm Spindle Kit for Street Bike Tire Changer worked great but the only thing i had to do is make a retro fit and cut a 3/4" pvc pipe to keep the ratchet from slipping down on the spindle, to keep duck head from slipping out on my rear bmw rim. This keeps the ratchet level. and worked great..
We've got a few bikes so when it came time to do the first change on my track bike I found that the front wheel wouldn't fit on the stock spindle. I saw there was a thinner one and purchased it immediately. It came in about 2 days and worked like a charm. At this point I think I have all the accessories that Rabaconda makes so I can change all the tires on all our bikes with ease.
Worked great but wished that it’s all metal. Not sure how long the plastic spacer will last. But it worked as it should be. Also wish this came with the kit originally on the time I purchased the kit instead of ordering it and paying for separate shipping and D/T. But none the less I’m happy with the purchase.
I paid $683.73 for a "street tire" tool that could not change a Honda Goldwing tire without me purchasing an add on spindle kit. must be a Honda Goldwing is not considered a "street bike" Hona believes it is one of the best.
When I first bought this for my 2022 duke 390, I was happy I was finally able to work on my own tires. 15mm main spindle fit like a charm. Only used my raba on the rear tire cause the front was already done and the tire was cold and it still got it done. Being able to freely spin the wheel help with inflation too cause somehow the tire wasn't in the drop center. But I popped it back on the raba use the beadbreaker to set the drop center using the 15mm of course. Now I'm back on the streets and happy with my purchase. Thanks Rabaconda for making a great tool.